国产AV无码一二三区天堂,亚洲高清无码一区二区三区

Location：Home > News Center >

Newsdetail

QUALITY CONTROL AND ASSUR

author：管理員 addtime：2010-07-02 17:15:54.000 hits：7001

QUALITY CONTROL AND ASSURANCE

(1) SAMPLING PLAN

U.S.Ministry of defense MIL-STD-105D level Ⅱ(single sampling plans)

(2) INSPECTION ITEMS AND CRITERIONS FOR JUDGEMENTS

“Measuring Methods for Light Emitting Diodes (No.11830)”and “Light Emitting Diodes(No.11829)”

Stipulated by ministry of economical affairs of R.O.C and by reference to Q.C.standards prevailing in prominent LED plants worldwide.

(3) RELIABILITY TESTS

“General Provisions for Environmental Tests of CNS-Catagorized Electronic Parts”3623-3634,5637,11233~11238,and U.S.Ministry of National Defense Mil-STD-750 Specifications.

ITEM	OPERATING METHOD
THERMAL SHOCK TEST	LED placed in a chamber (-44℃)for 20 minutes,temperature increased instaneously to +88℃ for 20 minutes.The duration of the test shall be for 10 complete cycles.
HUMIDITY TEST	LED placed in a humidity chamber which is maintained at 40℃,95%R.H.The duration of the test is for 96 hours.
LIFE TEST	LED connected to a source of power and charged with 10mA at room temperature(25℃)for1000hours.
SOLDERABILITY TEST	The pins of LED(16mm from body)dipped into tin which is maintained at 260℃±5℃.The duration of the test is for 5 seconds.
VIBRATION TEST	LED placed on a vibrator which is maintained at 10-55-10 Hz/minute. 0.82mm amplitude.The duration of the test is for 30 minutes.
PACKING TEST	LED packed in a corrugated fiberboard box and fallen freely on 6 faces at a diagonal angle to the ground.The altitude of the fall will be in the range of 229-609mm considering of the packed product.

THE MEASURING TERMS AFTER TEST AND FAILURE CRITERIA ARE AS FOLLOWS:

MEASURING TERMS	FAILURE CRITERIA
LUMINOUS INTENSITY(Iv)	LOWER STANDARD LIMIT ×0.5
FORWARD VOLTAGE(V)	UPPER STANDARD LIMIT ×1.2
REVERSE CURRENT(I_R)	UPPER STANDARD LIMIT ×2.0

Products

Newsdetail